8.0

Recapturing and Decomposing
252
3. Right-click on any selected item, and then select one of the following:
To deselect all selected tapes/sources or clips:
t Click below the last item in any of the information columns.
To select the target format for a tape/source or clip:
t Select a format from the menu for the tape/source or clip in the Target Format column.
The available target formats vary depending on the source formats.
Some source formats can only be recaptured in their original format. For these formats, the
entry in the Target Format column is only for your information, and you cannot select a
different format.
For more information, see “Expert Decompose” on page 246
.
To proceed with the decompose process:
t Click OK.
Recapturing a Sequence Without Using Decompose
When you recapture a sequence without using decompose, your Avid editing application creates
new master clips and captures new media in a single operation.
For more information on recapturing a sequence with and without decompose, see
“Understanding Recapturing” on page 244 and “Understanding Decompose and
Expert Decompose” on page 246
.
To recapture a sequence:
1. Select the proper Capture settings and set up the capture tools, as described in “Preparing for
Capture” on page 159
.
2. Open or activate the bin that stores the sequence.
3. Select Bin > Go To Capture Mode.
4. Select the sequence you want to recapture.
5. Select Clip > Batch Capture.
Command Description
Include in Decompose Selects the check box in the Decompose column for each of the
selected items.
Exclude from Decompose Deselects the check box in the Decompose column for each of
the selected items.