2018.x

Modifying Clip Information
293
6. Click OK.
The modification takes effect.
Modify Command Options
Type of Modification Options Description
Set Timecode Drop/
Non-drop
Drop, Non-drop Changes the timecode format between drop-frame and
non-drop-frame. Setting must match the timecode format
of the tape.
Set Timecode By Field Start or End Changes either the start or end timecode. You can only
alter start timecodes after capture.
Hour, Minutes, Seconds,
Frames
Lets you enter custom timecode.
Increment Timecode Start or End Changes either the start or end timecode. If you
increment the start timecode automatically, it modifies
the end timecode by the same amount. You can only alter
start timecodes after capture.
Timecode text box Lets you enter custom incremental timecode.
Decrement Timecode Start or End Changes either the start or end timecode. If you
decrement the start timecode, it automatically modifies
the end timecode by the same amount. You can only
decrement start timecode after capture.
Timecode text box Lets you enter custom decremental timecode.
Set Key Number
Generic (Prefix)
Key Number text box Lets you enter a custom generic key number. Only for
24p, 25p, and matchback projects.
Set Pullin A, B, C, or D Selects the pulldown phase to match to the timecode
entry (24p and matchback projects only). For more
information, see “Setting the Pulldown Phase” on
page 127.
After you capture, the clip must be unlinked. See
“Modifying the Pulldown Phase Before Capturing” on
page 131.
Set Tracks V, A1, A2, A3, A4, A5,
A6, A7, A8 and D track
selector buttons
Changes the clip’s configuration of tracks (film projects
only). You must unlink the clip. See “Unlinking Media
Files” on page 359.
Set Source None Opens the Select Tape dialog box. Selects another source
tape name for the clips that should match the original
source tape name.