9.0

257
To change the length of a take line:
1. Press the Ctrl key.
Notice the movement icon that appears when you point the cursor
at either end of the take.
2. Click the end mark or beginning mark of a take and drag it until
you reach the correct line in the script.
3. Press the Ctrl key and drag the opposite end of the take to a new
location if necessary.
4. Repeat the procedure for other takes in the slate as necessary.
Indicating Off-Screen Dialog
In the traditional lined script, you indicate off-screen dialog by draw-
ing a jagged line next to the dialog. You can apply a similar effect to
lines in the Script window.
To indicate off-screen dialog:
1. Select the range of script containing the off-screen dialog.
2. Select one or more takes that you want to mark with the off-screen
indicators.
3. Click the Set Offscreen button in the Script window toolbar.
The indicators appear, superimposed on the selected takes. You
can switch the indicators on or off by clicking the button
repeatedly.
To remove one or more off-screen indicators:
1. Select the range of script containing the off-screen indicators.
2. Select only those takes that display the indicators.
3. Click the Set Offscreen button.