9.0

439
The type of trim you perform (slip or slide) determines which frames
are updated, as follows:
• In slip trimming, the two inner monitors for the head and tail
frames of the clip change because only the contents of the clip are
adjusted. The frames that precede and follow the clip are not
affected.
• In slide trimming, the two outer monitors for the outgoing
(A-side) and incoming (B-side) frames change because the clip
remains fixed while the footage before and after it is trimmed.
Performing the Slip or Slide Trim
To slip or slide a shot:
1. After selecting the segments, as described in “Selecting Segments
for Slip or Slide Trimming” on page 436, do one of the following:
• Click any roller in the Timeline, drag the selected material to
the left or right, and release.
• Use the numeric keypad to enter specific frame-count or time-
code values, and press Enter.
Before slip
After slip
Frames
Surrounding material
Slip 1 frame to the right.
remains fixed.
1234
234 5
Before slide
After slide
Frames
Surrounding material
Slide 1 frame to the right.
is selected.
1234
234 5
1
1234
234