9.0

526
choose “Centered on Cut” or “Custom Start” from the Position
pop-up menu.
After rendering, the audio dips smoothly from the higher levels of the
adjacent segments of the track to the lower level applied to the middle
segment.
Mixing Down Audio Tracks
When you work with multiple audio tracks while editing your mate-
rial, you might need to mix the final audio down to two tracks.
After you edit a number of tracks of audio, mix them down to one or
two tracks of audio by following these steps:
1. Load a sequence into the Record monitor.
2. Click the Track buttons to select the audio tracks you want to mix
down.
3. Mark an IN and an OUT point at the start and end of the material
you want to mix down.
If you do not mark the section of audio you want to mix down, the
system mixes down all of the selected audio tracks.
4. Choose Audio Mixdown from the Special menu.
The Audio Mixdown Parameters dialog box appears. The top of
the dialog box displays the source audio tracks and the start and
end timecodes for the section of audio you have selected to mix
down.