9.0

97
General Settings
Table 4-6 describes the General Settings options.
Double-click These options determine what happens when you double-click an
object in a bin
Opens new monitor
for clip.
Creates a new pop-up monitor and automatically loads the clip when
you double-click an object in the bin.
Loads clip into Source or
Record monitor.
Loads the clip or sequence into the Source or Record monitor when you
double-click an object in a bin.
Table 4-5 Bin Settings Dialog Box Options (Continued)
Option Description
Table 4-6 General Settings Dialog Box Options
Option Description
Drive Filtering Based
on Resolution
Prevents digitizing high-resolution media to drives that do not have
sufficient speed to play the resolution. If you select this option, the
drives affected by drive filtering are unavailable when you try to
access them with the Digitize tool.
Drive filtering does not verify the drive speed when you select a drive
while rendering effects. Be sure when selecting your target drive for
rendering that it is fast enough to play the media.
Default Starting Timecode
Default Starting Edgecode
Specifies the timecode and edgecode values you want the system to
use as the default starting timecode and edgecode for each new
sequence.
NTSC Has Setup Allows systems using NTSC-EIAJ (used primarily in Japan) to use the
correct color mapping. NTSC-EIAJ users should not select this box. All
other users should select this box.
Project Format Displays the format currently selected for the project (NTSC or PAL).
This option cannot be changed.