11.5

106
Logging Source Material
To mark the location:
t Click the Mark Memory button.
To move through the tape to the marked location:
t Click the Go To Memory button.
To clear the memory mark:
t Click the Clear Memory button.
You can add one mark per tape. The memory mark is not stored on the
tape. When you remove the tape from the deck and insert another tape
into the decks, the mark is cleared.
Logging On-the-Fly
You can log clips while the tape is playing. This is called logging
on-the-fly. Logging on-the-fly requires the preparation described in
the following sections:
• “Selecting the Source Deck” on page 99
• “Identifying the Source Tape” on page 100
• “Setting the Audio Sample Rate” on page 101
You can log on-the-fly whether or not you already know where you
want to mark the IN and OUT points in your clips.
To log on-the-fly:
1. Insert your tape into the deck.
2. Open the bin where you want to store the clips, or create a new
bin.
3. Choose Go To Capture Mode from the Bin menu.
4. Select the audio and video tracks you want to log and their tape
name.