11.5

149
Using Text View
Modifying Data Directly
When you modify information in a bin directly, you click a cell and
type the new information. For example, you can type a new name for a
clip, or correct the start and end timecodes.
You can directly modify any data in the bin while logging and prior to
digitizing. After the footage is digitized, however, you can directly
modify information only in selected headings, with restrictions, as
shown in Table 5-4.
n
For more information on these headings, see “Bin Column Headings” on
page 160.
Table 5-4 Modifiable Bin Headings
Heading Restrictions
(Clip) Name No restrictions.
Mark IN Altering the mark IN also alters the IN to OUT duration. This replaces
any previous mark.
Mark OUT Altering the mark OUT also alters the IN to OUT duration. This
replaces any previous mark.
Color No restrictions.
Color Framing Must be according to tape specifications.
Auxiliary timecodes, 1–5 No restrictions.
KN (Key Number) Start Only for 24p projects, 25p projects, and matchback projects. Altering
the starting key number also alters the KN End to maintain the
duration. This can cause discrepancies with any auxiliary timecode
information you entered manually.
KN (Key Number) End Only for 24p projects, 25p projects, and matchback projects. Altering
the KN End also alters the KN Start to maintain the duration.