11.7

Chapter 2 Getting Started
24
• The computer includes at least 32 megabytes (MB) of random-access
memory (RAM).
MediaLog can control a deck that uses Sony serial deck protocol and a
timecode reader. You can control a single deck by connecting an RS-232
to RS-422 serial adapter kit to the serial port of your computer. MediaLog
can also control a deck through V-LAN
®
VLXi
®
connections.
n
If you need to connect and control more than one video deck, see the setup
guide for your Avid editing system.
A direct serial video deck connection requires a serial adapter kit that
contains these items (see the following figure):
• An RS-232 to RS-422 serial adapter
• Two serial cables; male 9-pin connectors at both ends
c
The computer and the deck must be off when you are connecting the
serial cable.
To connect a single deck to your PC:
1. Turn off the computer and the deck.
2. Attach one end of the first 9-pin cable to the end of the serial adapter
labeled RS-232.
3. Attach the other end of the first 9-pin cable to the serial port of your
computer.
n
When you attach the cable to the serial port on the computer, note if it is
port 1 or port 2. You will have to select the port in the Avid software.
To your
computer
To yo u r
deck
RS-422 connection
Serial adapter
RS-232 connection