2.5

Installing Avid Motion Graphics News Control
145
Configuring ENPS to Host AMG Journalist Client
If you are using AMG Journalist with ENPS, then you must configure ENPS to host the AMG
Journalist client.
n
This can be done from any ENPS client machine.
Once configured, the AMG Journalist client will need to be installed (from the X: drive) on all
ENPS client machines that need access to it.
To configure ENPS to host AMG Journalist client:
1. Open the ENPS client.
2. Select the green 'rover' on the 4th folder in the client, point to System Maintenance, and then
MOS Configuration.
3. If you already have a MOS ID configured for the Command system, add the following
information to the respective fields:
a. In the Description field, if a description is already entered, it should be changed to
AMG Journalist, so users can easily identify it.
b. In the IP field, type the IP address of the Command server, if not already done.
c. In the ActiveX field, type RCGPLUGIN.RCGpluginCtrl.1, which identifies the AMG
Journalist client plugin.
d. In the Program field, select the group that was created specifically for Command.
e. In the MOS Version field, 2.8 is the recommended version.
n
Make sure that the AMGConf.ini is also set to use MOS 2.8.