2.0

769
The green light next to the Select button for a track is on when you are
recording audio gain automation on the track. The green light is off
when you are listening to the volume level in the Timeline.
Ganging Faders on the FaderMaster Pro Fader Controller
You can use the features available on the FaderMaster Pro to gang
faders. When the faders for two tracks are ganged, both faders send
identical volume messages for both tracks when you move one fader.
This can be useful when you have stereo tracks.
Note that the ganged faders do not move together physically. For
example, if you have two stereo tracks and want to gang faders 1 and 2
to respond to movement on fader 1:
1. On the FaderMaster Pro, press the PROG button to light the Fader
LED.
2. Press the Group button, and move fader 2 until 1 is displayed.
3. Press the PROG button to turn off the Fader LED.
When you move fader 1, NewsCutter receives identical volume
information for fader 2.
To turn off the group feature:
t Repeat steps 1 to 3, but assign fader 2 to 0.
For additional information on ganging the faders, see the FaderMaster
Pro user’s manual.
n
You cannot gang faders on the MCS-3000X or Yamaha 01V fader boxes.