1.5
Table Of Contents
- Avid® NewsCutter®
- Introduction
- About NewsCutter
- Starting Your Project
- Recording
- Getting Ready to Edit
- Creating a First Cut
- Viewing Your Clips
- Navigating in the Timeline
- Using the Track Selector Panel
- Making the First Edit
- Splicing or Overwriting Video into a Sequence
- Marking Clips for Storyboarding
- Using the Go to IN and Go to OUT Buttons
- Moving to the Head or Tail of a Shot
- Undoing an Edit
- Redoing an Edit
- Splicing a Shot into the Middle of a Sequence
- Refining the Edit
- Adding Effects
- Creating Titles
- Working with Titles
- Understanding the Title Tool Window
- Adding Text
- Formatting Text in the Title Tool
- Selecting Objects in the Title Tool
- Choosing Colors and Setting Transparency
- Selecting a Color
- Creating a New Title
- Working with Title Templates
- Repositioning Text and Objects
- Applying a Color
- Applying a Shadow
- Saving a Title
- Editing the Title into the Sequence
- Editing an Existing Title
- Output
- Using the NRCS Tool
- Index
165
10. Select the Audio Out Mode.
n
Changing the Audio Out Mode in the Digital Cut tool also changes the audio
out in the Audio Mix tool.
11. Press Play.
The system cues the record deck and then plays and records the
digital cut. The playback appears in the Playback monitor.
12. To stop the recording at any time, press the space bar.
n
After assemble-edit recording, a freeze frame is usually added after the OUT
point for one or more seconds, depending upon the record deck model. This
provides several frames of overlap for the next IN point, before control track
and timecode break up.
n
NewsCutter allows you to choose a different format when creating a digital
cut to tape. For example, if your sequence is non-drop-frame and you choose
to make the digital cut drop-frame, an error message will appear, indicating
the mismatch. If you choose to continue, the duration of the digital cut will
not match the duration of your sequence.
Enabling VTR Play Emulation
VTR play emulation allows you to control a sequence loaded in the
Record monitor from an edit controller for playback in the edit room
along with other sources.
n
To use VTR play emulation, connect a supported controller to the PC by
using the serial adapter included with NewsCutter. See the Avid
NewsCutter Setup Guide.