10.0

Working with Multiple Tracks
665
The source side of the panel displays only those tracks available for the clip currently loaded. For
example, a clip that has audio captured only for track A1 does not display an A2 track in the
Track Selector panel.
The record side of the panel displays only those tracks currently in use for the sequence. When
you edit source material with a track selected that does not yet exist on the record side, by default
the track appears on the record side after the edit takes place.
Selecting Tracks
You can select tracks on the source side or the record side of the Track Selector panel to control
your options for editing. For example, you might select the source and record tracks for V1, A1,
and A2 to edit picture and audio from the source clip into the sequence. To edit the picture
without sound, select only V1 source and record tracks. To edit the sound without the picture,
select only A1 and A2 source and record tracks.
The following guidelines apply to track selection when you edit:
• You can edit selected tracks on the source side directly into the sequence, assuming you have
selected parallel tracks on the record side.
• You cannot edit deselected tracks on the source side into the sequence, regardless of record
track selections.
• You cannot edit deselected tracks on the record side into the sequence, regardless of source
track selections.
Audio Track, Source and Record
Timecode button
Icon Button