Manualshelf

7.5

ManualsBrandsAvid Digidesign M-Audio Pinnacle Sibelius ManualsApplicationsNewsCutter
461462463464465466467468469470
Table Of Contents
Core AudioSuite Plug-Ins
467
Compressor/Limiter III Applies either compression or limiting to audio material, depending on the ratio of
compression used. For more information, see “Compressor/Limiter III (Dynamics III)
AudioSuite Plug-In” on page 478.
Expander/Gate III Applies expansion or gating to audio material, depending on the ratio setting. For more
information, see “Expander/Gate III (Dynamics III) AudioSuite Plug-In” on page 482.
De-Esser III Reduces sibilants and other high frequency noises that can occur in vocals, voiceovers,
and wind instruments such as flutes. For more information, see “DeEsser III
(Dynamics III) AudioSuite Plug-In” on page 484.
EQ Allows you to adjust frequency equalization on individual audio clips. Four EQ
plug-ins are available: 1-Band EQ II, 4_Band EQ II, 1-Band EQ III, and 7-Band EQ
III. For more information, see “EQ AudioSuite Plug-Ins” on page 486.
Flanger Creates a flange effect that approximates a true tape-generated flange. For more
information, see “Flanger AudioSuite Plug-In” on page 491.
Funk Logic
Mastererizer
Provides low-fidelity sound design capabilities for the creative degredation of audio.
For more information, see “Funk Logic Mastererizer AudioSuite Plug-in” on page
492.
Invert Inverts the polarity (phase) of the audio file. For more information, see “Invert
AudioSuite Plug-In” on page 492.
Duplicate Creates a new master clip from a selected audio clip. The plug-in uses the IN and
OUT points on the selected clip to define the boundaries of the new clip. For more
information, see “Duplicate AudioSuite Plug-In” on page 492.
Delay Provides time-delay-based effects. Effects obtained through the use of Delay include
slap echo, doubling, chorusing, and flanging. For more information, see “Delay
AudioSuite Plug-In” on page 493.
Multi-Tap Delay Allows you to control up to four independent delays applied to the audio clip. For
more information, see “Multi-Tap Delay AudioSuite Plug-In” on page 494.
Normalize Finds the peak value in the source audio file and scales the entire file proportionally to
that maximum value. For more information, see “Normalize AudioSuite Plug-In” on
page 495.
Gain Same as Normalize, but allows positive or negative gain adjustment. For more
information, see “Gain AudioSuite Plug-In” on page 495.
Ping-Pong Delay Allows you to add a delay to an audio clip to create a ping-pong echo effect. For more
information, see “Ping-Pong Delay AudioSuite Plug-In” on page 496.
Core AudioSuite Plug-Ins
Plug-In Description