User's Manual

MT3B_Manual -PH 12-16-16.docx - 12/16/2016

Introduction

Congratulations on the purchase of your new AVID MiniTracker 3B™ Reader.This reader is

capable of reading AVID and many other brands of electronic identification microchips using the

FECAVA, TROVAN or ISO FDX-B protocols.

This reader is also capable of wirelessly sending the text of the microchip it reads a short distance

to a smart phone, tablet, or computer that supports Bluetooth

wireless technology version 4.0 or

above.

Instructions

1. Power Button

Turn the reader ON by sliding the lower right

hand button forward on the face of the

reader. When the reader is powered on, it

will emit a double beep sound and the LCD

will display AVID UNIQUE NONE, where

UNIQUE is a 6-character alphanumeric

identifier for Bluetooth, and NONE is the

current display mode for Bluetooth.

- Modes include: NONE, ENTR, TAB,

or OFF.

- To turn the reader OFF, slide the button

back. (See Figure 1 right.)

2. Read Button

Press the upper right button (marked

“READ”) on the reader to put the reader into

the LOOKING mode. (See Figure 1 right.)

The LCD will display LOOKING. When a

microchip is found, the reader will emit two

beep tones and display the chip number on

the LCD. If the Read button is released

before finding a microchip, the message NO

ID FOUND will display on the LCD.

Figure 1