Setup guide

Connector Pinouts and Connections
111
LTC Timecode Connector Specifications
The LTC In is an AC coupled input which requires a minimum 100mV between the LTC and
ground. Peak-Peak input levels can be anywhere between 300 mV and 5.3V.
LTC Loopthrough displays Playback, Channel 2.
In the following LTC diagram:
• Pin 1 is located at the center.
• Ground is located on the outer shell.
The following table lists LTC specifications.
n
Shielded cable must be used on each connection to maintain RFI compliance. Connect the shield
of the cable to the shield of the connector.
LTC Timecode Input/Loopthrough Connector Specifications
Pin # Signal Function
1 LTC Single ended input
Ground