Specifications

Chapter 3: Track and Session Basics 19
Track Basics
This section shows how to select, route, show/hide, and group tracks.
Selecting Tracks
You can select tracks using the fader strip SEL keys on Artist Mix and Artist Control.
To select a track on Artist Mix or Artist Control:
 Press any fader SEL key.
The track is selected in Pro Tools. You can use standard Pro Tools shortcuts in combination with the
fader SEL keys to do the following.
To select all tracks:
 Hold Option (Mac) or Alt (Windows) on your computer keyboard and press any unlit track SEL key.
To deselect a track:
 Hold Command (Mac) or Start (Windows) on your computer keyboard and press a lit track SEL key.
To deselect all selected tracks:
 Hold Option key (Mac) or Alt (Windows) on your computer keyboard and press any lit track SEL
key.
To select a range of tracks:
1 Press the SEL key on the first track (usually, the left-most track you want to include in the selection).
2 Hold the Shift key on your computer keyboard and press the SEL key on the last (right-most) track.
All tracks between the two are selected.
To select non-adjacent tracks (add to a selection):
1 Press the SEL key to select any track.
2 Hold Command (Mac) or Start (Windows) on your computer keyboard and press an unlit track SEL
key.
Default Soft Key assignments include the QWERTY key modifiers Shift, Control, Option, and
Command (Mac) or Shift, Control, Alt, and Start (Windows) for convenient access on units that
do not include a QWERTY keyboard.