Specifications

Artist Series and Pro Tools20
Track Input and Output Routing
Routing Track Input and Output on Artist Control
These examples show how to assign track input and output from the Soft Keys and Touchscreen sec-
tions on Artist Control.
To assign track input on Artist Control:
1 Select a channel by pressing its SEL key.
2 In the Soft Encoders, press the Input Soft Encoder. The Touchscreen shows the input assignment for
the currently selected track.
3 Press Soft Encoder 1 (the one showing the current input assignment, if any). The first three Soft En-
coders now display no input, interface, and bus.
4 Press Soft Encoder 1, 2, or 3 to select the following as desired:
no input (encoder 1) Assign no input source to the track.
hardware (encoder 2) Displays available hardware input choices on the Soft Encoders.
bus (encoder 3) Displays available internal bus choices on the Soft Encoders.
Artist Control shows up to eight available hardware or bus choices at a time (one in each Soft En-
coder). You can navigate to additional hardware or bus choices by pressing < PAGE or PAGE >.
5 When the desired input source is displayed, press its Soft Encoder.
6 To exit Input Assign mode, press BACK (each press returns you up one level), or press
SHIFT + BACK/TOP to exit and return to the top Soft Keys level.
Soft Encoder for Input
SOFT KEYS
HOME
END