Specifications

Artist Series and Pro Tools34
3 To view other insert slots, press PAGE > until that slot and any assigned plug-ins are displayed.
4 Press the encoder for the plug-in you want to edit.
The first page of parameters for that plug-in are mapped across the encoders.
5 Press PAGE > (or PAGE <) to access other parameters for the current plug-in.
Assigning Plug-ins on Artist Control
To assign a plug-in on Artist Control:
1 Select a track.
2 Press the Inserts encoder.
3 Press both PAGE keys (< PAGE and PAGE >) to enter Insert Assign mode. Insert slots are displayed
in the Touchscreen (a, b, c, and so on), and both PAGE keys flash.
4 Press the encoder next to the desired insert slot.
5 The Soft Encoders show the next level of choices: no insert, multichannel, multi-mono, or I/O (for hard-
ware inserts, when available).
6 Press the encoder for the desired insert type. The Soft Encoders show the next level of choices such
as EQ, Dynamics, Reverb, and so on. (Choices shown on your system will vary depending on which
plug-ins you have installed, and the Pro Tools setting to organize plug-ins by Category or Manufac-
turer).
7 When the desired plug-in is displayed, press its encoder again to insert it on the selected track.
Making Plug-ins Inactive or Active on Artist Control
To toggle a plug-in between active and inactive:
1 Bank to and select the desired track.
2 Press the INSERTS encoder.
3 Navigate the Touchscreen until the desired insert slot and plug-in name is displayed.
4 Press both SHIFT keys simultaneously to enable Shift mode (both key LEDs stay lit).
5 Hold Command+Control (Mac) or Control+Start (Windows) and touch the insert name in the
Touchscreen.
For information about plug-in automation, see Chapter 7, “Automation and Mixing.”