Specifications

Chapter 1: Introduction 1
chapter 1
Introduction
Avid’s EUCON
TM
(Extended User Control) adapter enables fully integrated control of Pro Tools
®
from
EUCON-compatible control surfaces.
This guide explains how to enable Artist Series controllers and use them with Pro Tools 9.0 or higher
on supported Mac and Windows systems.
System Requirements and Compatibility
The features described in this guide require the following:
• Artist Series control surface
• Pro Tools or Pro Tools HD version 9.0 or higher
• EuControl software version 2.5.6 or higher (Mac), or version 2.5.7 or higher (Windows)
For downloads and other Artist Series resources, visit:
www.avid.com/artistsupport
Avid can only assure compatibility and provide support for hardware and software it has tested and
approved. For complete system requirements and a list of qualified computers, operating systems,
hard drives, and third-party devices for Pro Tools, visit:
www.avid.com/compatibility
For setup and configuration instructions for EUCON on Pro Series systems (such as MC Pro and
System 5) see the instructions that came with your hardware. For the latest software updates and in-
formation about these Avid control surfaces, visit www.avid.com/proseriessupport.