Specifications

HD MADI Guide18
I/O Setup
This section describes how to configure input,
output, and bus signal paths for HD MADI in the
Pro Tools I/O Setup.
Opening the I/O Setup Dialog
To open the I/O Setup dialog:
1 Make sure HD MADI is configured properly in
the Hardware Setup dialog (see “Hardware
Setup” on page 13).
2 Choose Setup > I/O.
For more information the I/O Setup dialog,
see the Pro Tools Reference Guide.
I/O Setup dialog (Output page with HD MADI shown)
Figure 1. HD MADI in the I/O Setup with both DigiLink ports connected