Product specifications

ISIS Toolbox
129
Saving Disk Analyzer Test Results
You can save the results of the Disk Analyzer tests to your local system. The test results are saved in comma
separated value (CSV) format.
To save the results of the Disk Analyzer tests:
1. Click Save Results.
The Save Results window opens.
2. Browse to the location on your local system where you want to save the test results and click Save.
The test results are saved to the specified location.
Storage Manager Parameters Tool
The Avid ISIS Storage Manager Parameters tool allows you to set and retrieve Storage Manager logging and
redistribution flags. This status information is useful to Avid Customer Support personnel for monitoring system
status during prolonged operations.
c
Do not use the Avid ISIS Storage Manager Parameters tool unless instructed to do so by Avid Customer
Support. Improper use could result in system downtime or degraded performance.
Using the Storage Manager Parameters
The Storage Manager lists all components of the shared storage network in a tree view. You can view events for:
• All components in the shared storage network — Select all active Avid ISIS systems in the Selection window
(the highest level in the tree view).
• Any subset of components — Select one or more entries in the Selection window (at a level lower than the
Avid ISIS Systems in the tree view).
n
You must run the Storage Manager Parameters tool from a system with network access to the entire shared storage
network. Otherwise, the tool cannot collect logs for all systems connected to the network.
To open the Storage Manager Parameters tool:
1. Do one of the following:
t (Windows) Select Start > Avid > Toolbox > Avid ISIS Toolbox.
t (Macintosh) Select Applications > AvidISISTools > ISIS Toolbox.
If any site security warnings open, click Yes to accept the certificate. If you are not sure about the security
requirements of your shared storage network, see your system administrator.
The Avid ISIS Toolbox opens.
2. Click Storage Manager in the left pane.
The Storage Manager window opens.
To close the Storage Manager Parameters tool:
1. Click Close.
A dialog box opens asking you to confirm that you want to quit the ISIS Toolbox.
2. Click Yes.