Setup guide

EUCON Application Setup Guide10
Surround Panning MC Mix
MC Mix lets you use the encoders to control multichannel pan parameters.
To pan in surround:
1 Press a track SEL key to select a track assigned to a multichannel output path (such as a 5.1 or 7.1 output path).
2 Press the PAN key.
3 Press the CHAN key. Multichannel pan parameters such as Front Left/Right, Front/Rear, divergence, pan, and center percentage
appear in the Soft Encoders.
4 Press the lit PAGE > key to show other available pan parameters.
5 Rotate an encoder to adjust it.
6 To reset a parameter to its default setting, press the encoder for that parameter.
As an alternative to using the encoders, hold SHIFT and press the CHAN/FLIP key to flip pan controls
to the faders. Press
FLIP again to return pan to the encoders.
For more workflows, see the Artist Series Pro Tools Guide.