Instruction manual

Appendix C: Wiring Diagrams and Pin Assignments 93
SYNC Peripheral Cable Pin
Assignments
SYNC Peripheral DigiSerial Cable
A 12-foot Serial cable is included with the SYNC
peripheral to support connection of the SYNC
peripheral to the DigiSerial port on a
Pro Tools|HD-series core card.
If you need to make a custom DigiSerial cable,
refer to the following pin assignment table for
the SYNC-to-DigiSerial port cable.
SYNC Setup Software Utility Cable
(Windows Only)
The following table shows the pin assignments
needed for a SYNC-to-COM port cable to
support the SYNC Setup software utility on a
Windows computer.
SYNC-to-DigiSerial cable
Mini DIN 8-pin Male to Mini DIN 8-pin Male
12
21
35
44
53
68
77
86
SYNC-to-COM cable (Windows)
Mini DIN 8-pin Male to 9-pin D-Sub Female
27
32
45
53
78
Shell Shell
1, 6, 8 none 1, 4, 6, 9 none