Setup guide

Installing the Windows Client Hardware
21
Installing an SFP Connector
4. Slide the SFP into the MEDIASwitch 16-4G port. You should hear a click
when the SFP is seated in the port.
5. Remove the protective covers from the optical connector on the optical
cable.
6. Remove the protective cover from the SFP in the MEDIASwitch 16-4G.
7. Attach the connector on the cable into the SFP for the client. Firmly push
the plug on the cable into the connectors on the SFP.
8. Label the cable with the name or location of the Windows client to which
it connects.
Connecting Cables to the LANserver EX
The LANserver EX allows you to connect up to five Fibre Channel clients to
use the storage simultaneously with any attached Ethernet clients. The Fibre
Channel clients connect directly to the dual-channel Fibre Channel boards in
the LANserver EX.
SFP
a
a
SFP