Setup guide

Chapter 1 Installing the MediaNetwork Windows Fibre Channel Client Hardware
24
Fibre Channel Adapter Board LED States
You can use the Fibre Channel adapter board LEDs to determine if the adapter
board is working or might be experiencing problems. Table “LED States and
Required Action” shows the LED colors, the LED states and meanings, and
the action you should take if a failure occurs.
LED States and Required Action
LED Color LED State Meaning Required Action
Green On Normal (link up) No action is required.
Yellow On Link down Check the cable connections to the MEDIASwitch 16-
4G and the adapter board. If the condition persists,
contact Avid Customer Support.
Yellow Flashing Fault Contact Avid Customer Support.
Green or
Yellow
Off Driver not installed Install the driver. If the condition persists, contact Avid
Customer Support.