User Manual
Table Of Contents
- Contents
- Welcome to Mbox
- Installing Pro Tools on Mac
- Installing Pro Tools on Windows
- Configuring Your Pro Tools System
- Mbox Hardware Overview
- Making Hardware Connections
- Using the Driver Control Panel
- Using the Multi Button
- Configuring AMS (Mac OS X Only)
- Configuring MIDI Studio Setup (Windows Only)
- Hard Drive Configuration and Maintenance
- Troubleshooting
- Resources
- Compliance Information
- Index
Chapter 5: Mbox Hardware Overview 35
Mic/Line Inputs
Each analog source input channel provides
combination XLR/TRS on the rear panel. These
balanced/unbalanced analog audio inputs sup-
port the following input levels:
• Mic (microphone) for XLR inputs
• Line (TRS) for line level signals on TRS or TS
inputs
On the front panel, the input signal is adjusted
by the Gain control for each channel and the
source (rear panel Mic/Line, or front panel In-
strument) is chosen using the Source selectors.
Mic/Line Input 2 is at the far left (when looking
at the back panel), and Mic/Line Input 1 is to its
right. The back panel inputs for Mic/Line Input
1 and Mic/Line Input 2 are located such that
they are directly in line with their associated in-
put controls on the front panel. This lets you lo-
cate input jacks more easily when viewing from
the front of the unit.