User Manual
Table Of Contents
- Contents
- Welcome to Mbox
- Installing Pro Tools on Mac
- Installing Pro Tools on Windows
- Configuring Your Pro Tools System
- Mbox Hardware Overview
- Making Hardware Connections
- Using the Driver Control Panel
- Using the Multi Button
- Configuring AMS (Mac OS X Only)
- Configuring MIDI Studio Setup (Windows Only)
- Hard Drive Configuration and Maintenance
- Troubleshooting
- Resources
- Compliance Information
- Index
Appendix A: Using the Driver Control Panel 49
FX Sends Mode
Pre-Fader FX Sends
When Pre-Fader FX Sends is selected, the full au-
dio signal will be sent to the FX Sends, regardless
of the position of the Channel Faders of stereo
mix 1–2.
Post-Fader (Mix 1/2) FX Sends
When Post-Fader (Mix 1/2) is selected, the audio
signal level being sent to the FX Sends will be af-
fected by the position of the Channel Faders of
Stereo Mix 1.
Flow
Clicking the Flow pop-up menu opens a display
showing the signal flow from the inputs to the
outputs of Mbox. This is a useful reference for
understanding the path of an audio signal flow-
ing through Mbox.
About
The About pop-up menu allows you to view the
firmware version of the Mbox hardware, and the
package version of the Mbox driver installer.
Viewing Firmware and Installer
Information
Directly above the status indicators, you can
view the firmware version of the Mbox Mini
hardware, and the package version of the Mbox
driver installer.
Accessing the Web Links
Along the bottom-right of the Driver Control
Panel you can easily access helpful online re-
sources on our Avid website (www.avid.com) by
clicking on the following pop-up menus:
•Manual
•Updates
• Support
•FAQs
•Register
Clicking on any of the “Web links” will
open your web browser. Your computer must
have Internet access for these pages to load.
Firmware and driver information
Web links