User Manual
Table Of Contents
- Contents
- Welcome to Mbox
- Installing Pro Tools on Mac
- Installing Pro Tools on Windows
- Configuring Your Pro Tools System
- Mbox Hardware Overview
- Making Hardware Connections
- Using the Driver Control Panel
- Using the Multi Button
- Configuring AMS (Mac OS X Only)
- Configuring MIDI Studio Setup (Windows Only)
- Hard Drive Configuration and Maintenance
- Troubleshooting
- Resources
- Compliance Information
- Index
Mbox User Guide54
Swap Button Swaps the stereo image, making the
left channel play out the Right output, and the
right channel play out the Left output.
Link Button Links the FXReturns section and the
mute buttons.
Master Meters Lets you have a visual representa-
tion of the audio signal being fed to the associ-
ated hardware output pair.
Stereo Mix Copy Lets you copy the settings of the
current stereo mix to one of the other stereo
mixes.
Status Indicators
Along the bottom-left of the Driver Control
Panel are the following status indicators:
Hardware Connected
This tells you the status of the hardware; if a
properly installed, powered-on Mbox is con-
nected to the computer.
Streaming
This indicates if audio from a Digital Audio
Workstation or a media player (such as Pro Tools
or Windows Media Player) is currently stream-
ing audio to the Mbox.
Host Control Enabled
If an application such as Pro Tools has control
over the Driver Control Panel, then “Host Con-
trol Enabled” displays.
Status indicators