User Manual

Appendix B: Using the Multi Button 57
Undo Each time the button is pressed and re-
leased, it undoes that last operation you per-
formed in Pro Tools. (Same as the Undo com-
mand from the Pro Tools menu)
Save Session Each time the Multi button is
pressed and released, it saves the session.
Tap Tempo The Multi button can be tapped to
adjust the session tempo. Tapping tempo will
cause Pro Tools to come out of Conductor mode
and match its tempo to the tapped tempo. If
Pro Tools is already in Manual Tempo mode, the
session will automatically adjust its tempo to
match the value created by the Tap Tempo func-
tion.
Press and Hold Options
When you click on the Press and Hold list, a
pop-up menu provides access to the following
options:
None No function is selected in this mode.
Add Last Track Adds whatever the last track type
was that you created in the session. Say you
have five types of tracks in your session but the
most recent track you created was 1 Mono
Audio Track, in Samples. It will add another
1 Mono Audio Track, in Samples.
Add Selected Track Adds whatever tracks that
you have selected in a session. Say you have se-
lected two Audio tracks in a session. It will add
another two Audio tracks.
Cursor to Next Marker Each time the button is
held and released, the transport will locate to
the next marker location.
Cursor to Previous Marker Each time the button
is held and released, the transport will locate to
the previous marker location.
Start/Stop Playback Each time the button is
held and released, it starts/stops playing back
the session.
Start/Stop Record Each time the button is held
and released, it starts/stops recording.
Loop Playback Toggle Each time the button is
held and released, the Loop Playback mode is
toggled between enabled and disabled.
Undo Each time the button is held and released,
it undoes that last operation you performed in
Pro Tools. (Same as the Undo command from
the Pro Tools menu)
Save Session Each time the Multi button is held
and released, it saves the session.