User Manual

Chapter 4: HD I/O Configuration 17
chapter 4
HD I/O Configuration
This chapter explains how to configure
Pro Tools for use with HD I/O.
Hardware Setup
In the Hardware Setup dialog, Pro Tools lets you
set the default sample rate (if no session is open)
and clock source for your system, and provides
access to a range of controls specific to each type
of audio interface.
Default Sample Rate
The Sample Rate setting appears as the default
sample rate when you create a new session. (This
setting is available in the Hardware Setup dialog
only when no session is open.)
To change the default Sample Rate for new
sessions:
1 If a Pro Tools session is currently open, close
it.
2 Choose Setup > Hardware.
3 From the Sample Rate pop-up menu, select the
sample rate that you want.
4 Click OK.
For more information about configuring your
Pro Tools|HD system, see the Pro Tools|HD
User
Guide.
You can change the sample rate when cre-
ating a new Pro Tools session by selecting
a different sample rate in the New Session
dialog.
Selecting the default sample rate