User Manual

Selecting the Sync Source for Output

1042

To add LTC Out During Preroll

1. Load your sequence in the Record monitor.

2. Select Output >Digital Cut.

3. Select the LTC out during preroll option.

4. Press the Play Digital Cut button.

LTC Output During Digital Scrub (When Using Nitris DX only)

LTC timecode will be output when the blue bar in the record monitor is moved, that is, during

“digital scrub.” The LTC value is only output when audio is also output, that is, when Caps Lock

is engaged or the shift key is down. The LTC value output corresponds to the first audio frame

played, obeying the Audio Setting “Record Monitor Scrub” value for “Outgoing” frames.

Typical outboard hardware will add one frame to LTC values it receives, expecting to display the

value on the next frame, so when paused, an “outgoing” value of 1 is normally required to get

the outboard hardware to display the expected frame.