User Manual

Preserving HD Closed Captioning and Ancillary Data
1101
Controlling Ancillary Data through a Settings Window - Legacy Method
This feature is only available with an Avid Nitris DX or an Avid Mojo DX. You can turn the
ancillary data option on and off and set the slots through the Media Creation Settings.
To switch the ancillary data feature on and off through a Settings window:
1. Do one of the following:
t Double-click Media Creation in the Settings list.
t Select Tools > Media Creation.
2. Click the Capture tab.
3. From the Ancillary Data Mode Setting, select Legacy.
4. Select a Data Type for each slot you want to display ancillary data for.
The default DID and SDID number displays for that slot.
n
The DID and SDID information captured with the data clip displays in the bin.
n
For more information about ancillary data options, see “Media Creation Settings” on
page 1424.
Controlling Ancillary Data with a Console Command (Legacy Method
only)
You can turn the ancillary data option on and off and set the slots with Console Commands.
To switch the ancillary data feature on and off with a Console command:
1. Select Tools > Console.
2. Type the following command:
Embeddnxcc
To set the default for ancillary data preservation for all four slots:
1. Select Tools > Console.
2. Type the following command:
Embeddnxccdefault
The default for all four slots is set to the values listed in the table below.
The following table lists the DID and SDID number values for the four ancillary data
packets that your Avid editing application can capture and preserve by default: