User Manual

Selective Camera Cutting
1307
To perform selective camera cutting with grouped clips:
1. Load the group or multigroup clip into the Source monitor.
2. Using timecode notes and the numeric keypad, type the timecode for the first take to begin
the sequence, and press Enter (Windows) or Return (Macintosh) to cue the clip in the Source
monitor to the take.
3. Mark IN and OUT points for the entire scene.
4. Select a camera angle for the first clip, and then splice the entire scene into a sequence.
5. Use the arrow keys, the Add Edit button, or both to select edit points and switch to different
angles throughout the master scene in the sequence.
6. To replace a portion of the take with a part from another take, use the timecode notes again
to cue the take, set marks, and perform a replace edit.
7. When you are finished with a scene, repeat the procedure for each additional scene in the
sequence.