User Manual

Preparing to Capture Audio
209
7. To change the digital level of the meter’s display of 0 VU, click Set Reference Level.
The Set Reference Level dialog box opens.
8. Enter the new reference level in dB.
This should be set to match the 0 VU standard in your workflow. Avid recommends a
-20 dBfs value.
9. Select the interface you want to calibrate: Analog XLR input, Analog RCA input, Analog
TRS input, Monitor output, or Analog output.
Options vary depending on your Avid input/output hardware. You can calibrate only one
channel at a time.
10. Select the appropriate channel.
Channels vary depending on your Avid input/output hardware.
11. Use the Up and Down buttons to adjust the calibration in 0.5dB increments.
Depending on what you selected in the HW Calibration menu, enter the corresponding
Output or Input.