User Manual

Using AMA Plug-Ins
416
Tint Adjusts the RGB color to compensate for yellow - green tinting of
the scene at different color temperatures of the ambient light while
you shoot. This is valuable when the ambient light source contains a
significant amount of yellow or green, such as fluorescent. Click and
drag the slider from -100 to 100. Default is 0.00.
ISO Allows the ISO level to change from 50 to 2000. Default is 320.
FLUT
™
The latest color science developed by RED. Allows you to balance
your mid-grays in the center of the histogram without pushing
highlight details over the edge.
Shadow Adjusts the overall black level of the image without affecting the
white level. Click and drag the slider from 0.00 to 1.00. Default is
0.00.
DRX Lets you recover potentially lost dynamic range by extending and
balancing highlights, taking into account the rendering intent of the
desired Kelvin and Tint white balance. Click and drag the slider from
0.00 to 1.00. Default is 0.00.
Debayer Detail Choose from High (default), Medium, or Low.
Chroma Denoise Choose from Off (default), Minimum, Milder, Mild, Strong, or
Maximum.
OLPF Controls the optical low-pass filter. Choose from Off (default), Low,
Medium, or High.
Exposure Allows adjustment to the clip exposure. Click and drag the slider
from -7.00 to 7.00. Default is 0.00.
Brightness Adjusts the overall brightness of the image. Lifts blacks without
affecting the white level. Click and drag the slider from -10.00 to
10.00. Default is 0.00.
Contrast Adjusts the tonal range of the image, which usually improves
sharpness and detail. When you increase the Contrast, it increases
tonal separation between adjacent gray levels but decreases the total
number of discreet gray levels in the image.
Click and drag the slider from -1.00 to 1.00. Default is 0.00.
Option Description