User Manual

Using AMA Plug-Ins
417
5. Click Apply.
The changes apply to your clip. You can continue to make additional changes.
If the clip is in the Source viewer, the changes are reflected in the Source viewer and in the
Client monitor (if you have one attached).
If you click Cancel after you click Apply, the Set Source Settings window closes with the
changes you made.
6. Click OK to save your change and close the window.
The system updates the bin column metadata with the new parameters.
n
If you make changes in the Source Settings window and then relink the clip through AMA again,
you still keep all the parameters that you set.
Saturation Affects the intensity of the red, green and blue channels. As the value
increases color saturation increases. As the value decreases, so does
the color decrease. If the value is set to high, colors might clip. If the
level is set to 0.00, a monochromatic image with only gray tones
appear.
Click and drag the slider from 0.00 to 4.00. Default is 1.00
Red Increases or decreases the camera’s sensitivity to red light by
amplifying the R channel digital video signal received from the
sensor. A 0 (zero) no Red is visible, the image has a strong cyan cast.
Click and drag the slider from 0.00 to 10.00. Default is 1.00.
Green Increases or decreases the camera’s sensitivity to green light by
amplifying the G channel digital video signal received from the
sensor. At 0 (zero), no green is visible, the image has a strong
magenta cast. Click and drag the slider from 0.00 to 10.00. Default is
1.00.
Blue Increases or decreases the camera’s sensitivity to blue light by
amplifying the B channel digital video signal received from the
sensor. At 0 (zero), no blue light is visible, the image has a strong
yellow cast. Click and drag the slider from 0.00 to 10.00. Default is
1.00.
Option Description