User Manual

Using Live Mix Mode
828
The following table describes the Audio Mixer tool Fast menu options in Live Mix mode:
Live Mix Mode Example
The following illustration shows the Live Mix mode settings on two tracks in the Timeline. Track
A1 is at 0 dB, and the volume of track A2 is set to -45. The Live Mix mode settings are not
represented in the Timeline, but you can hear the difference when you play the audio.
In point only Commands apply adjustments to full clips from the In point to the end of
selected tracks.
Out point only Commands apply adjustments to full clips from the beginning of selected
tracks to the Out point.
None Commands apply globally (across entire tracks).
Points Set Description
Command Description
Set Live Mix to Default Sets the active tracks to 0 dB and does not modify any existing
volume automation keyframes.
Set Live Mix to Automation Sets the Live Mix mode settings to match the volume and pan
settings where each track crosses the Position bar in the Timeline.
When you use this option, the system permanently removes the
existing automatic volume or pan key frames between the In and Out
points.
Set Live Mix as Automation Removes the existing volume automation or pan keyframes and
replaces them with the current Live Mix mode settings. You usually
use this option with In and Out points. The system applies the Live
Mix mode levels to the portions of the selected tracks between the
points.