User Manual

859
The following list provides additional information on touch sensitivity and automatically
stopping recording:
• Touch sensitivity — As soon as you touch a moving fader on the 002 or Command|8, the
unit passes control of the fader to you.For more information, see “Using the Latch Mode
Feature on the 002 and Command|8” on page 871.
• Latch mode — In Latch mode, you record gain information only while touching the fader. In
Latch mode, recording begins when you touch and ends when you stop playback. For more
information, see “Using the Latch Mode Feature on the 002 and Command|8” on page 871.
For more information on using these external fader controllers or mixers, see “Understanding
Volume or Pan Automation Recording” on page 817.
Provides audio
play, input, and
output
Yes No No No No
Record volume
automation
Yes Yes Yes Yes No
Record pan Yes Yes Yes Yes No
Flying faders Yes (8) Yes (8) Yes (4) Yes (8) No
Touch-sensitive
faders
Yes Yes Yes Yes No
Touch-sensitive
panners
No No Yes Yes No
Solo/mute Yes Yes Yes Yes No
Supports audio
mixing
No
a
No No No No
Latch mode Yes Yes Yes Yes No
Number of steps of
fader accuracy
1024 1024 1024 1024 Not applicable
a. The Digi 002 can be used as a standalone audio mixer but not at the same time as it is being used as a volume
automation or pan controller or control surface.
Feature Digi 002 (MC/NC only) Command|8 MC Control MC Mix MC Transport