User Manual

Configuring Ethernet Connections (Macintosh)
893
To configure your Avid editing application for an Artist Series controller:
1. Double-click Controller Settings in the Settings list of the Project window.
The Controller Settings dialog box opens.
2. Select Controller > EUCON Controller.
3. Click OK.
Configuring Ethernet Connections (Macintosh)
You can connect your Artist Series controller to either the Ethernet 1 or Ethernet 2 port on your
Macintosh system. By default, the EuControl application is configured to use Ethernet 1. You
might need to change this configuration if your system connects to a corporate network or if it is
part of a shared storage environment — for example, if you connect your Macintosh system to an
Avid ISIS system.
The following procedure describes how to configure your network connections if you need to
reserve one Ethernet port for a network or shared storage connection. You can use either Ethernet
port for your Artist Series controller, but you should set the network priority for your network or
storage connection higher than the priority for your Artist Series controller.
To configure Ethernet ports on a Macintosh system:
1. Connect your Artist Series controller to either the Ethernet 1 or Ethernet 2 port on your
Macintosh system.
2. Select the Apple menu > System Preferences.
3. In the Other area, click Euphonix.
The Euphonix dialog box opens.