User Manual

Controller Application Sets
917
Solo button Solos the selected track.
On button Unmutes and mutes the selected track.
Chan Enables channel mode.
Flip (Shift+Chan) Switches control between the fader controls to the knobs. A vertical double
arrow appears in the display when the faders and knobs are flipped.
Insert Allows you to select the plug-in effect listed in the display. Press the soft
knob for a track to select the plug-in.
Input (Shift+Input) Displays the Input knob set to configure input routing, mic gains, phantom
power, and other application-specific parameters when pressed.
EQ Allows you to adjust a track’s EQ parameters.
Dyn (Shift+EQ) Displays the Dynamics knob set to configure compressors, limiters,
expanders, and gates when pressed.
Aux Assign a track’s first aux send to a soft knob.
Group (Shift+Aux) Displays the Group knob set to configure group bus routing or control group
(VCA) membership.
Pan Enables selected channels for pan control using the soft knob.
Mix (Shift+Pan) Displays the Mix knob set to configure output routing.
Fader strips Allow you to adjust parameters while recording volume automation or pan.
Press the Shift key and touch a fader to set it to unity gain.
Control Function