User Manual

Core Avid Audio Plug-Ins
945
AIR Ensemble (RTAS)
You can use the Ensemble plug-in to apply fluid, shimmering modulation effects to the audio
signal.
The following table lists the AIR Ensemble plug-in parameters:
Parameter Description
High Gain Adjusts the frequency to boost the high end.
Low Gain Adjusts the frequency to boost the low end.
Tune Lets you set the center frequency for low and high-end enhancement.
• Low — Sets the center frequency for the bass boost.
• High — Sets the center frequency for the treble boost.
Harmonic
Generation
Lets you generate additional high-frequency harmonics, which can brighten up dull signals.
• Depth — Generates additional high frequency harmonics in the signal (0.0–12.0 dB).
• Phase — Toggles the polarity of the generated harmonics, changing their phase relationship
with the dry signal.
Output Lets you lower the Output level from 0.0 dB to –INF dB.
Parameter Description
Rate Changes the frequency of the modulating LFO (0.01–10.0 Hz).
Depth Adjusts the amount of modulation applied to the Delay time.
Modulation Lets you adjust and randomize the delay time.
• Delay — Adjusts the Delay time.
• Shimmer — Lets you randomize the Delay time, adding texture to the effect.
Stereo Width Lets you widen or narrow the effect’s stereo field.
Mix Lets you balance the amount of dry signal with the amount of wet (processed) signal. At 50%,
the output includes equal amounts of dry and wet signal. At 0%, the output is all dry and at
100% it is all wet.