User Manual

Core Avid Audio Plug-Ins
948
Rate Lets you select from the following rhythmic values:
• 16 (sixteenth note)
• 8T (eighth-note triplet)
• 16D (dotted sixteenth-note)
• 8 (eighth note)
• 4T (quarter-note triplet)
• 8D (dotted eighth-note)
• 4 (quarter note)
• 2T (half-note triplet)
• 4D (dotted quarter-note)
• 2 (half note)
• 1T (whole-note triplet)
• 3/4 (dotted half note)
• 4/4 (whole note)
• 5/4 (five tied quarter notes)
• 6/4 (dotted whole note)
• 8/4 (double whole note)
Depth Lets you adjust the amount of modulation applied to the Delay time.
Pre-Delay Sets the minimum delay time in milliseconds.
LFO Provides controls for the Low Frequency Oscillator (LFO) used to modulate the Delay time.
• Retrigger — Resets the LFO phase. This lets you manually start the filter sweep from that
specific point in time (or using automation, at a specific point in your arrangement). Clicking
the Retrigger button also forces the Mix control up if it is too low while the button is held.
This ensures that the sweep is audible.
• Wave — lets you interpolate between a triangle wave and a sine wave for the modulating
LFO.
• L/R Offset — Lets you adjust the phase offset for the LFO waveform applied to the left and
right channels.
Parameter Description