User Manual

Core Avid Audio Plug-Ins
976
Duplicate (AudioSuite)
The Duplicate plug-in creates a new master clip from a selected audio master clip. The plug-in
uses the In and Out points on the selected clip to define the boundaries of the new clip. This
plug-in applies only when you use the Create New Master Clips features of the AudioSuite
plug-ins.
Mix Lets you control the balance between the delayed signal and the original signal. If you use a
delay for flanging or chorusing, you can control the depth of the effect somewhat with the
Mix setting.
LPF (Low-Pass
Filter)
Controls the cutoff frequency of the low-pass filter. This parameter lets you attenuate the
high-frequency content of the feedback signal. The lower the setting, the more high
frequencies are attenuated.
Delay Sets the delay time between the original signal and the delayed signal.
Depth Controls the depth of the modulation applied to the delayed signal.
Rate Controls the rate of modulation of the delayed signal.
Feedback Controls the amount of feedback applied from the output of the delay back into its input.
Also controls the number of repetitions of the delayed signal. Negative Feedback settings
give a more intense “tunnel-like” sound to flanging effects.
Tempo Sets the desired tempo in beats per minute. When a specific Duration is selected, moving this
control will affect the Delay setting.
Meter Lets you enter either simple or compound time signatures. The default time signature is 4/4.
Duration Specifies a desired delay from a musical perspective. You can click one of the note value
buttons (whole note, half note, quarter note, eighth note, sixteenth note). If necessary, click
the Triplet modifier or Dot modifier button to dot the selected note value or make it a triplet.
Groove Provides fine adjustment of the delay in percentages of a 1:4 subdivision of the beat. You can
use this parameter to add “swing” by slightly offsetting the delay from the precise beat of the
track.
Parameter Description