User Manual

Exporting Your Clip or Sequence to a P2 Card
985
Exporting Your Clip or Sequence to a P2 Card
If you have a P2 card writer, you can export a clip or sequence to your P2 card. The writer can be
a P2 device or a camera enabled for P2 writing. You can export to one card or multiple cards.
n
If you connect to more than one P2 device, make sure only one is turned on. If more than one
device is turned on, you cannot control which device you export to.
Option Description
Video Format Lists all XDCAM codecs supported by your
project type.
Audio Bit Depth Defines bit depth, based on the sample rates
supported by your project type.
You can use this option if your sequence has a
mix of sample rates and you need to create a
single sample rate. (You set the project rate in the
Audio Project Settings dialog box. For more
information, see “Audio Project Settings for
Capture” on page 169.).
Display Aspect Ratio Defines an image size for the video you want to
export. The available aspect ratios depend on
what your project type and device support. This
lets you control the display format without
modifying the source file.