User Manual

Exporting to XDCAM
1032
To export to an XDCAM device:
1. Connect your XDCAM device.
2. Select the appropriate mode on your XDCAM device that corresponds to the video format
that you will be exporting.
For example, set your XDCAM device to 1080i 59.94 if you want to export a clip or
sequence at XDCAM-35 1080I/59.94.
3. Select the sequence or clips to export.
4. Select Output > Export to Device > XDCAM.
If you have a sequence loaded in the Record monitor, the sequence exports when you select
Export to Device.
You can also right-click the clip or sequence in a bin and select Export to Device.
The XDCAM Export Settings dialog box opens.
5. (Option) Select Use Marks.
The current IN and OUT points in the selected clip or sequence determine starting and
ending frames for the export.
6. (Option) Select Use Enabled Tracks.
The system uses tracks that are enabled in the timeline. To export all the tracks in the
sequence, deselect this option.
7. Select an XDCAM disk from the Target XDCAM Disk list.
If the target XDCAM disk you are exporting to already has other clips on it, you are only
allowed to export a clip with the same number of audio tracks. For example, if the target
XDCAM disk has a clip with 4-tracks of audio, you cannot export a new XDCAM clip with
2 tracks. You either have to reformat the disk and wipe it clean or add two dummy tracks to
your 2-track sequence before you export.