User Manual

Preparing for Audio Output
1056
5. Play back one of the following sources of reference audio by doing one of the following:
t Click the Peak Hold (PH) Menu button, and select Play Calibration Tone.
t Play back a representative sequence or clip containing audio.
6. Watch the levels in the meters, and adjust the master attenuator to the level that you want.
n
To adjust levels for individual tracks, use the Audio Mixer tool. See “Using the Audio Mixer
Tool” on page 788.
7. Close the Audio tool.
8. Close the Audio Project Settings dialog box.
Setting Audio Output Options
The Audio Project Settings dialog box contains options for audio output, such as how audio
tracks in the sequence are mapped to output channels.
To set audio output options:
1. Double-click Audio Project in the Settings list in the Project window.
The Audio Project Settings dialog box opens.
2. Click the Output tab.
Audio Project Settings dialog box: Mixed Mode Selection Menu button (top), All or Timeline Track Maps menu
and Which Set of Track Maps button (left), Output Track Maps (right), Output Format and Channels options
(bottom)