User Manual

Audio Project Settings
1358
All or Timeline Track
Maps
Available when you select Direct Out with the Mix Mode Selection Menu button.
Maps the track and output channels:
• All: Lets you choose between all available tracks.
• Timeline: Lets you assign output channels to the tracks monitored in the
Timeline.
Which Set of Track Maps Available when you select Direct Out with the Mix Mode Selection Menu button.
Defines the groups of output tracks to map to audio channels. Groups of tracks
display in multiples of 8, up to the maximum of 24 available audio tracks.
Reset Available when you select Direct Out with the Mix Mode Selection Menu button.
Reassigns the audio tracks of the sequence to the default channels that are
currently available.
Output type option tab:
Analog
Turns analog output on or off.
Output type option tab:
SD SDI
This option is available depending on your Avid input/output hardware.
Use the On or Off option to control whether to embed the audio with the video in
SDI output.
Select one of the following based on the number of channels you want and the
sample rate you want on the outgoing SDI signal:
• 4 channels 20-bits
• 4 channels 24-bits
• 8 channels 20-bits
• 8 channels 24-bits
n
With some Avid input/output hardware devices, you must use 48-kHz audio
when SDI is enabled. With Avid Nitris DX or , you do not need 48-kHz
audio.
Output type option tab:
HD SDI
This option is available for HD projects depending on your Avid input/output
hardware.
Use the On or Off option to control whether to embed the audio with the video in
HD SDI output.
Select either 4 channels 24-bits or 8 channels 24-bits, based on the number of
channels you want on the outgoing SDI signal.
Option Description