User Manual

Media Creation Settings
1425
Media Creation Settings: Common Options in Capture, Titles, Import,
Mixdown & Transcode, Motion Effects, and Render Tabs
Media Creation Settings: Additional Options for Capture Tab
On indexing failure Determines how your Avid editing application reports indexing failure messages.
For information on using the Console, see “Using The Console Window” on
page 115.
Option Description
Option Description
Video Resolution Select a resolution.
Apply to All Applies your chosen resolution to all the Media Creation dialog box tabs, and to any
other place in your Avid editing application where you select a resolution.
n
The resolution options are not available in the Motion Effects tab.
n
Your Avid editing application always renders an effect at the highest resolution
used in the effect source clips.
Video/Audio Drive Defines the drives your Avid editing application uses to store video and audio media.
In the Titles tab, only a Video Drive option is available.
Apply to All Applies your chosen video and audio drives to all the Media Creation dialog box tabs,
and to any other place in your Avid editing application where you select drives.
Option Description
Slot Displays slot number 1-4.
Data Type Defines the type of ancillary data you want to assign to a particular slot.
DID and SSID Displays the DID and SDID number values for the ancillary data packets that your
Avid editing application captures and preserves by default.
n
The DID and SDID information captured with the data clip displays in the bin.
Enable Lets the system capture the ancillary data selected to the slot on the system.
Ancillary Data Mode
Setting (Avid Nitris DX
or Avid Mojo DX)
This option varies depending on your Avid input/output hardware:
(Avid Nitris DX or Avid Mojo DX only) Choose between SMPTE 436M or Legacy.
To capture to a data track, select SMPTE 436M or to capture ancillary data to a
DNxHD video file, select Legacy