User Manual

(Symphony) Using HD Universal Mastering
1523
12. Mark an IN point on the first frame of the sequence.
13. Make sure the position indicator in the Timeline is on the first frame of the sequence.
14. Click the Overwrite button to add the converted audio to original sequence.
(Symphony) Performing a Digital Cut with HD Universal Mastering
Once you have mixed down your audio tracks and added the new audio clip to your sequence,
you can output your sequence at a new frame rate by performing a digital cut.
You can perform several types of cross-conversion or downconversion digital cuts from 1080
projects by selecting from the Output Format menu in the Digital Cut tool. These digital cuts are
frame-accurate and allow for standard deck control.
The output formats available to you vary depending on the project format and on your Avid
input/output hardware. The following table describes the available options.
When you make downconvert output format selections, you can select further options, such as an
SD downconvert resize or, for NTSC, a timecode format.
Project Format Output Formats
1080p23.976
1080p24
1080p25
1080p23.976
1080p24
1080p25/PAL
1080i59.94/NTSC
1080p24
1080p23.976
1080p25/PAL
1080i59.94/NTSC
1080p25 PAL
1080p23.976
1080p24
1080i59.94 NTSC
1080i50 1080i50
PAL 25i
1080i59.94 1080i59.94
NTSC 30i